Netgear WNDAP380Rv2 Manuel d'utilisateur télécharger pdf (Page 45)

Wireless Configuration and Security

ProSAFE Dual Band Wireless-N Access Point with RFID Support, WNDAP380R

Form for 802.11a/an Modes

Print the form and store the security information in a safe place:

• SSID: The service set identifier (SSID) identifies the wireless local area network. Y

ou can

customize it by using up to 32 alphanumeric characters. Write your SSID on the line.

SSID: ___________________________________

The SSID in the wireless access point is the SSID you configure on the wireless adapter

card. All wireless nodes in the same network need to be configured with the same SSID.

• WEP key size and authentication

Choose the key size by circling one: 64, 128, or 152 bits.

Choose the authentication type by circling one: open system or shared key.

Passphrase: ___________________________________

Note: If you select shared key, the other devices in the network cannot connect unless

they are set to shared key and have the same keys in the same positions as those in the

wireless access point.

• WPA-PSK (pre-shared key) and WPA2-PSK

Record the WP

A-PSK passphrase:

WPA-PSK passphrase: ________________________________

Record the WPA2-PSK passphrase:

WPA2-PSK passphrase: ________________________________

• WP

A RADIUS settings

For WP

A, record the following settings for the primary and secondary RADIUS servers:

Server name or IP address: Primary _______________ Secondary ________________

Port: ___________________________________

Shared secret: ___________________________________

• WP

A2 RADIUS settings

For WP

A2, record the following settings for the primary and secondary RADIUS servers:

Server name/IP address: Primary ________________ Secondary _________________

Port: ___________________________________

Shared secret: ___________________________________

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 151 152

Pas de commentaire

Netgear WNDAP380Rv2 Manuel d'utilisateur Page 45