Netgear WNDAP380Rv2 Manuel d'utilisateur télécharger pdf (Page 21)

Installation and Basic Configuration

ProSAFE Dual Band Wireless-N Access Point with RFID Support, WNDAP380R

2. Configure the settings as explained in the following table:

Setting Description

Time Zone Select the time zone to match your location.

Current Time This is a nonconfigurable field that displays the current date and time.

NTP Client Enable the Network Time Protocol (NTP) client to synchronize the time of the

wireless access point with an NTP server

. By default the Enable radio button is

selected.

Use Custom NTP Server Select this check box if you want to use a custom NTP server.

Hostname /

IP Address

Enter the host name or IP address of the custom NTP server

The default NTP server depends on the selected time zone.

For example, for China the default is time-e.netgear

.com.

3. Click Apply.

Configure the IP Settings

WARNING:

If you enable the DHCP client, the IP address of the wireless

access point changes when you click Apply, causing you to lose

your connection to the wireless access point. You then need to

use the new IP address to reconnect to the wireless access point.

Note: You need to have an Internet connection to use an NTP server that is

not on your local network.

Note: If you use a host name, make sure that you have

configured a DNS server. For more information, see the next

section.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 151 152

Pas de commentaire

Netgear WNDAP380Rv2 Manuel d'utilisateur Page 21