Netgear WNDAP350 Guide de l'utilisateur télécharger pdf (Page 78)

ProSafe Dual Band Wireless N Access Point WNDAP350 Reference Manual

3-10 Management

v2.0, April 2013

2. Use something with a small point, such as a pen, hold the Reset button for 5 seconds while you

Power On the WNDAP350.

3. Continue holding the Reset Button until the LEDs blink twice.

4. Release the Reset Button.

The factory default configuration has now been restored and the WNDAP350 is ready for use.

Changing the Administrator Password

The default password is password. You should change this password to a more secure password,

since you cannot change the administrator login name.

To change the Administrator password:

1. Under the Maintenance tab on the main menu, select Password, and then select Change

Password. The Change Password screen displays as shown in Figure 3-8 below.

2. First enter the old password in the Current Password field.

Figure 3-8 Change administrator password

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 137 138

Pas de commentaire

Netgear WNDAP350 Guide de l'utilisateur Page 78