Netgear WNDAP350 Guide de l'utilisateur télécharger pdf (Page 63)

ProSafe Dual Band Wireless N Access Point WNDAP350 Reference Manual

Basic Installation and Configuration 2-41

v2.0, April 2013

To configure WPA-PSK:

1. From the Network Authentication drop-down menu, select WPA-PSK. By default, Data

Encryption will be set to TKIP.

2. Enter the preshared key passphrase (Network Key).

3. Wireless Client Security Separation is disabled by default. If enabled, associated wireless

clients will not be able to communicate with each other. (This feature is intended for hotspots

and other public access situations.

4. Click Apply to save your settings.

Configuring WPA2-PSK

Not all wireless adapters support WPA2. Furthermore, client software is required on the client.

Make sure your client card supports WPA2. Consult the product document for your wireless

adapter and WPA2 client software for instructions on configuring WPA2 settings.

To configure WPA2-PSK:

Figure 2-22 Configure WPA2-PSK

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 137 138

Pas de commentaire

Netgear WNDAP350 Guide de l'utilisateur Page 63