Netgear WG302v1 Manuel d'utilisateur Page 76

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 98
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 75
NETGEAR ProSafe 802.11g Wireless Access Point WG302 Reference Manual
4-4 Advanced Configuration
v4.0, April 2006
Wireless LAN parameters. The default advanced wireless LAN parameter settings usually
work well. However, if you want the WG302 to operate in Super-G mode, use this feature
To set up Advanced Wireless Settings:
1. From the main menu under Advanced, Select Advanced Wireless Settings. The Advanced
Wireless Settings screen will display.
2. Wi-FI Multimedia (WMM) is disabled (No) by default. Select the Yes radio button to enable
WMM support.
3. Enable the Wireless LAN Parameters by checking the Yes radio button and entering the
appropriate information in the fields described in Table 4-1, below.
Figure 4-3.
Table 4-1. Advanced Wireless LAN Settings Fields
Field Description
Enable SuperG Mode Click Enable to enable SuperG Mode.
RTS Threshold The packet size used to determine whether it should use the CSMA/CD
(Carrier Sense Multiple Access with Collision Detection) or the CSMA/CA
(Carrier Sense Multiple Access with Collision Avoidance) mechanism for
packet transmission. The default is 2346.
Fragmentation Length This is the maximum packet size used for fragmentation. Packets larger
than the size programmed in this field will be fragmented. The Fragment
Threshold value must be larger than the RTS Threshold value. The default
is 2346.
Vue de la page 75
1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 97 98

Commentaires sur ces manuels

Pas de commentaire