Netgear WG302v1 Manuel d'utilisateur Page 74

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 98
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 73
NETGEAR ProSafe 802.11g Wireless Access Point WG302 Reference Manual
4-2 Advanced Configuration
v4.0, April 2006
.
3. Configure the following TCP/IP configurations for using the WG302 as a DHCP server for
wireless clients.
•Starting IP Address. Enter the starting IP address that can be assigned from the DHCP
server on this Access Point.
Ending IP Address. Enter the Ending IP address that can be assigned from the DHCP
server on this Access Point
Subnet Mask. The Access Point will assign the specified subnet mask to the connected
wireless stations.
Gateway Address. The Access Point will assign this IP address as the default gateway for
any traffic beyond the local network.
Primary DNS Server. The Access Point will assign this IP address as the primary
Domain Name Server used by the connected wireless stations.
Secondary DNS Server. The Access Point will assign this IP address as the secondary
Domain Name Server used by the connected wireless stations.
Primary WINS Server. The Access Point will assign this IP address as the primary
WINS Server used by the connected wireless stations.
Figure 4-1.
Vue de la page 73
1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 97 98

Commentaires sur ces manuels

Pas de commentaire