
NETGEAR ProSafe 802.11g Wireless Access Point WG302 Reference Manual
Management 3-9
v4.0, April 2006
Viewing Available Wireless Station Statistics
The Available Wireless Station List lists each wireless access point and client node associated with
this Access Point. For each device, the table shows the Station ID, MAC address, IP Address, and
Status (whether the device is allowed to communicate with the wireless access point or not).
To view the Wireless Station List:
1. From the main menu of the browser interface under Information, select Available Wireless
Station List.
2. Click Refresh to update the list.
Upgrading the Wireless Access Point Firmware
The software of the ProSafe 802.11g is stored in Flash memory, and can be upgraded as new
software is released by NETGEAR. Upgrade files can be downloaded from the NETGEAR Web
site. If the upgrade file is compressed (.ZIP file), you must first extract the image (.RMG) file
before sending it to the wireless access point. The upgrade file can be sent using your browser.
Note: A wireless network can include multiple wireless access points, all using the same
network name (SSID). This enables extending the reach of the wireless network
and allows users to roam from one access point to another, providing seamless
network connectivity. Under these circumstances, be aware that only the stations
associated with this access point will be presented in the Available Station List.
Figure 3-6.
Tip: If the wireless access point is rebooted, the table data is lost until the wireless
access point rediscovers the devices. To force the wireless access point to look
for associated devices, click the Refresh button.
Commentaires sur ces manuels