Netgear Switch M4100 Manuel d'utilisateur Page 538

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 559
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 537
538 | Chapter 31. DVMRP
ProSafe M4100 and M7100 Managed Switches
A screen similar to the following displays.
b. Scroll down and select the Port 1/0/11 check box.
Now 1/0/11 appears in the Port field at the top.
c. Enter the following information:
In the IP Address field, enter 192.168.3.1.
In the Subnet Mask field, enter 255.255.255.0.
In the Routing Mode field, select Enable.
d. Click Apply to save the settings.
3. Configure 1/0/3 as a routing port and assign an IP address to it.
a. Select Routing > IP >
Advanced > IP Interface Configuration.
A screen similar to the following displays.
b. Scroll down and select the Port 1/0/3 check box.
Now 1/0/3 appears in the Port field at the top.
c. Enter the following information:
In the IP Address field, enter 192.168.4.2.
In the Subnet Mask field, enter 255.255.255.0.
In the Routing Mode field, select Enable.
Vue de la page 537
1 2 ... 533 534 535 536 537 538 539 540 541 542 543 ... 558 559

Commentaires sur ces manuels

Pas de commentaire