Netgear Switch M4100 Manuel d'utilisateur télécharger pdf (Page 169)

100

101

Chapter 10. ACLs | 169

ProSafe M4100 and M7100 Managed Switches

b. Under Binding Configuration, make the following selection and enter the following

information:

• In he ACL ID field, select 101.

• In the Sequence Number field, enter 1.

c. Click Unit 1.

The ports display.

d. Click the gray box under port 48.

A check mark displays in the box.

e. Click Apply to save the settings.

13. Apply

ACL 103 to port 24 and port 48:

a. Select Security >

ACL > Advanced > IP Binding Configuration.

A screen similar to the following displays.

b. Under Binding Configuration, make the following selection and enter the following

information:

• In the ACL ID field, select 103.

• In the Sequence Number field, enter 2.

c. Click Unit 1.

The ports display.

Configure the following ports:

• Click the gray box under port 24.

A check mark displays in the box.

• Click the gray box under port 48.

A check mark displays in the box.

d. Click Apply to save the settings.

Set up a MAC ACL with Two Rules

The example is shown as CLI commands and as a Web interface procedure.

1 2 ... 164 165 166 167 168 169 170 171 172 173 174 ... 558 559

Commentaires sur ces manuels

Pas de commentaire

Netgear Switch M4100 Manuel d'utilisateur Page 169

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Netgear Switch M4100