Netgear Switch M4100 Manuel d'utilisateur Page 427

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 559
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 426
Chapter 27. IPv6 Interface Configuration | 427
ProSafe M4100 and M7100 Managed Switches
2. Add an IPv6 gateway to the network interface.
a. Select System > Management > Network Interface > IPv6 Network
Configuration.
A screen similar to the following displays.
b. In the IPv6 Gateway field, enter 2001:1::2.
c. Click Apply.
Create an IPv6 Routing VLAN
The example is shown as CLI commands and as a Web interface procedure.
CLI: Create an IPv6 Routing VLAN
1.
Netgear Switch) (Vlan)#vlan 500
(Netgear Switch) (Vlan)#vlan routing 500
(Netgear Switch) (Vlan)#exit
Create a routing VLAN with VLAN ID 500.
2. Add interface 1/0/1 to VLAN 500.
(Netgear Switch) #config
(Netgear Switch) (Config)#interface 1/0/1
(Netgear Switch) (Interface 1/0/1)#vlan participation include 500
(Netgear Switch) (Interface 1/0/1)#vlan participation pvid 500
(Netgear Switch) (Interface 1/0/1)#exit
Vue de la page 426
1 2 ... 422 423 424 425 426 427 428 429 430 431 432 ... 558 559

Commentaires sur ces manuels

Pas de commentaire