Netgear Switch M4100 Manuel d'utilisateur Page 149

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 559
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 148
Chapter 10. ACLs | 149
ProSafe M4100 and M7100 Managed Switches
A screen similar to the following displays.
b. Under IP Configuration, make the following selections:
For Routing Mode, select the Enable radio button.
For IP Forwarding Mode, select the Enable radio button.
c. Click Apply to enable IP routing.
5. Add a static route with IP address 192.268.40.0/24:
a. Select Routing > Routing T
able > Basic > Route Configuration.
A screen similar to the following displays.
b. Under Configure Routes, make the following selection and enter the following
information:
In the Route
Type list, select Static.
In the Network Address field, enter 192.168.40.0.
In the Subnet Mask field, enter 255.255.255.0.
In the Next Hop IP
Address field, enter 192.168.200.2.
c. Click Add.
6. Create a static route with IP address 192.168.50.0/24:
a. Select Routing > Routing T
able > Basic > Route Configuration.
Vue de la page 148
1 2 ... 144 145 146 147 148 149 150 151 152 153 154 ... 558 559

Commentaires sur ces manuels

Pas de commentaire