Netgear XSM7224S Manuel d'utilisateur télécharger pdf (Page 119)

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0

Switching Commands 3-78

v1.0, November 2010

Guest VLAN

Period

The time in seconds for which the authenticator waits before authorizing and placing the

port in the Guest VLAN, if no EAPOL packets are detected on that port.

Supplicant

Timeout

The timer used by the authenticator state machine on this port to timeout the supplicant.

The value is expressed in seconds and will be in the range of 1 and 65535.

Server Timeout The timer used by the authenticator on this port to timeout the authentication server. The

value is expressed in seconds and will be in the range of 1 and 65535.

Maximum

Requests

The maximum number of times the authenticator state machine on this port will

retransmit an EAPOL EAP Request/Identity before timing out the supplicant. The value

will be in the range of 1 and 10.

VLAN Id The VLAN assigned to the port by the radius server. This is only valid when the port

control mode is not Mac-based.

VLAN Assigned

Reason

The reason the VLAN identified in the VLAN Idfield has been assigned to the port.

Possible values are RADIUS, Unauthenticated VLAN, Guest VLAN, default, and Not

Assigned. When the VLAN Assigned Reason is ‘Not Assigned’, it means that the port

has not been assigned to any VLAN by dot1x. This only valid when the port control mode

is not MAC-based.

Reauthenticatio

n Period

The timer used by the authenticator state machine on this port to determine when

reauthentication of the supplicant takes place. The value is expressed in seconds and

will be in the range of 1 and 65535.

Reauthenticatio

n Enabled

Indicates if reauthentication is enabled on this port. Possible values are ‘True” or “False”.

Key

Transmission

Enabled

Indicates if the key is transmitted to the supplicant for the specified port. Possible values

are True or False.

Control

Direction

The control direction for the specified port or ports. Possible values are both or in.

Maximum Users The maximum number of clients that can get authenticated on the port in the MAC-based

dot1x authentication mode. This value is used only when the port control mode is not

MAC-based.

Unauthenticate

d VLAN ID

Indicates the unauthenticated VLAN configured for this port. This value is valid for the

port only when the port control mode is not MAC-based.

Session

Timeout

Indicates the time for which the given session is valid. The time period in seconds is

returned by the RADIUS server on authentication of the port. This value is valid for the

port only when the port control mode is not MAC-based.

Session

Termination

Action

This value indicates the action to be taken once the session timeout expires. Possible

values are Default, Radius-Request. If the value is Default, the session is terminated the

port goes into unauthorized state. If the value is Radius-Request, then a reauthentication

of the client authenticated on the port is performed. This value is valid for the port only

when the port control mode is not MAC-based.

Term Definition

1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 578 579

Commentaires sur ces manuels

Pas de commentaire

Netgear XSM7224S Manuel d'utilisateur Page 119

Commentaires sur ces manuels

Produits connexes et manuels pour Logiciel Netgear XSM7224S