Netgear WNDAP330 Guide de l'utilisateur Page 111

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 142
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 110
ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual
Advanced Configuration 4-19
v1.0, May 2008
If using DHCP, all WNDAP330 Wireless Access Points should be set to “Obtain an IP
address automatically (DHCP Client)” in the IP Address Source portion of the Basic IP
Settings menu.
All WNDAP330 Wireless Access Points use the same SSID, Channel, authentication
mode, if any, and encryption in use.
4. Verify connectivity across the LANs.
A computer on any LAN segment should be able to connect to the Internet or share files and
printers with any other PCs or servers connected to any of the three WLAN segments.
5. Click Apply to save your settings.
Note: You can extend repeating by adding up to two additional WNDAP330s configured
in repeater mode. However, since Repeater configurations communicate in half-
duplex mode, the bandwidth decreases as you add Repeaters to the network. Also,
you can extend the range of the wireless network with NETGEAR wireless antenna
accessories.
Vue de la page 110
1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 141 142

Commentaires sur ces manuels

Pas de commentaire