Netgear WAG302v1 Manuel d'utilisateur Page 78

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 108
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 77
ProSafe Dual Band Wireless Access Point WAG302 Reference Manual (802.11a/g)
4-2 Advanced Configuration
v2.0, May 2006
.
3. Configure the following TCP/IP configurations for using theWAG302 as a DHCP Server for
wireless clients.
Starting IP Address: Enter the starting IP address that can be assigned from the DHCP
server on this Access Point.
Ending IP Address: Enter the Ending IP address that can be assigned from the DHCP
server on this Access Point
Subnet Mask: The Access Point will assign the specified subnet mask to the connected
wireless stations.
Gateway Address: The Access Point will assign this IP address as the default gateway for
any traffic beyond the local network.
Primary DNS Server: The Access Point will assign this IP address as the primary
Domain Name Server used by the connected wireless stations.
Secondary DNS Server: The Access Point will assign this IP address as the secondary
Domain Name Server used by the connected wireless stations.
Primary WINS Server: The Access Point will assign this IP address as the primary
WINS Server used by the connected wireless stations.
Figure 4-1
Vue de la page 77
1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 107 108

Commentaires sur ces manuels

Pas de commentaire