Netgear WAG302v1 Manuel d'utilisateur Page 51

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 108
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 50
ProSafe Dual Band Wireless Access Point WAG302 Reference Manual (802.11a/g)
Basic Installation and Configuration 2-27
v2.0, May 2006
To configure a Security Profile:
1. From your Web browser, log in to the WAG302 using the default LAN address of
http://192.168.0.230, user name admin and password password, or use the LAN address and
password that you set up.
2. From the main menu under Security, select either Security Profile Settings 11a or Security
Profile Settings 11b/g. The screen for the Profile Settings you selected will display as shown in
Figure 2-14 above.
3. Check the radio button of the profile you want to modify and click Edit. The Security Profile
Configuration screen for the selected profile will display.
4. Give your profile a meaningful name so that you can remember it later.
5. The Wireless Network Name (SSID) is set by default to identify it as either a NETGEAR-11a
or a NETGEAR-11g wireless network.
6. Enable or disable the Broadcast Wireless Network Name (SSID). It is enabled by default. (If it
is broadcast, it can be easily detected by other clients.)
7. From the pull-down menu shown in Figure 2-15, select the Network Authentication Type you
want to use for this profile:
Figure 2-15
Vue de la page 50
1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 107 108

Commentaires sur ces manuels

Pas de commentaire