Netgear XSM7224S Manuel d'utilisateur Page 145

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 579
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 144
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Switching Commands 3-104
v1.0, November 2010
lacp partner port id
Use this command to configure the LACP partner port id. The valid range for <port-id> is 0 to
65535.
no lacp partner port id
Use this command to set the LACP partner port id to the default.
lacp partner port priority
Use this command to configure the LACP partner port priority. The valid range for <priority>
is 0 to 255.
Default 0x80
Format lacp partner portid <port-id>
Mode Interface Config
Note: This command is only applicable to physical interfaces.
Format no lacp partner portid
Mode Interface Config
Default 0x0
Format lacp partner port priority <priority>
Mode Interface Config
Note: This command is only applicable to physical interfaces.
Vue de la page 144
1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 578 579

Commentaires sur ces manuels

Pas de commentaire