Netgear 802.11g Manuel d'utilisateur Page 271

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 296
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 270
NETGEAR VPN Configuration FVS318 or FVM318 with FQDN to FVS328 H-1
201-10301-02, May 2005
Appendix H
NETGEAR VPN Configuration
FVS318 or FVM318 with FQDN to FVS328
This appendix provides a case study on how to configure a VPN tunnel between a NETGEAR
FVS318 or FVM318 to a FWG114P v2 using a Fully Qualified Domain Name (FQDN) to resolve
the public address of one or both routers. The configurations screens and settings for the FVS318
and FVM318 are the same.
Configuration Template
The configuration in this document follows the addressing and configuration mechanics defined
by the VPN Consortium. Gather all the necessary information before you begin the configuration
process. Verify whether the firmware is up to date, all of the addresses that will be necessary, and
all of the parameters that need to be set on both sides. Check that there are no firewall restrictions.
Table H-1. Summary
VPN Consortium Scenario: Scenario 1
Type of VPN LAN-to-LAN or Gateway-to-Gateway (not PC/Client-to-Gateway)
Security Scheme: IKE with Preshared Secret/Key (not Certificate-based)
Date Tested: December 2003
Model/Firmware Tested:
NETGEAR-Gateway A FVS318 firmware version A1.4 or 2.0; FVM318 firmware version 1.1
NETGEAR-Gateway B FVS328 with firmware version 1.0 Release 00
IP Addressing:
NETGEAR-Gateway A Fully Qualified Domain Name (FQDN)
NETGEAR-Gateway B Static IP address
Vue de la page 270
1 2 ... 266 267 268 269 270 271 272 273 274 275 276 ... 295 296

Commentaires sur ces manuels

Pas de commentaire