Netgear 802.11g Manuel d'utilisateur télécharger pdf (Page 273)

Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P v2

NETGEAR VPN Configuration FVS318 or FVM318 with FQDN to FVS328 H-3

201-10301-02, May 2005

DynDNS service. Gateway B will use the DDNS Service Provider when establishing a VPN

tunnel.

In order to establish VPN connectivity Gateway A must be configured to use Dynamic DNS, and

Gateway B must be configured to use a DNS hostname to find Gateway A provided by a DDNS

Service Provider. Again, the following step-by-step procedures assume that you have already

registered with a DDNS Service Provider and have the configuration information necessary to set

up the gateways.

Step-By-Step Configuration of FVS318 or FVM318 Gateway A

1. Log in to the FVS318 or FVM318 labeled Gateway A as in the illustration.

Out of the box, the FVS318 or FVM318 is set for its default LAN address of

http://192.168.0.1, with its default user name of

admin and default password of password.

For this example we will assume you have set the local LAN address as 10.5.6.1 for Gateway

A and have set your own password.

2. Click Dynamic DNS on the left side of the Settings management GUI.

3. Access the Web site of one of the dynamic DNS service providers whose names appear in the

‘Use a dynamic DNS service’ list, and register for an account.

For example, for dyndns.org, click the link or go to www.dyndns.org.

Figure H-2: Dynamic DNS Setup menu

1 2 ... 268 269 270 271 272 273 274 275 276 277 278 ... 295 296

Pas de commentaire

Netgear 802.11g Manuel d'utilisateur Page 273