Netgear 802.11g Manuel d'utilisateur télécharger pdf (Page 169)

Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P v2

Maintenance 9-9

201-10301-02, May 2005

Erasing the Configuration

It is sometimes desirable to restore the router to a known blank condition. This can be done by

using the Erase function, which will restore all factory settings. After an erase, the router's

password will be password, the LAN IP address will be 192.168.0.1, and the router's DHCP client

will be enabled.

To erase the configuration, click the Erase button.

To restore the factory default configuration settings without knowing the login password or IP

address, you must use the Default Reset button on the rear panel of the router. See “Restoring the

Default Configuration and Password” on page 11-7.

Changing the Administrator Password

The default password for the router’s Web Configuration Manager is password. Netgear

recommends that you change this password to a more secure password.

From the main menu of the browser interface, under the Maintenance heading, select Set Password

to bring up this menu.

Figure 9-6: Set Password menu

To change the password, first enter the old password, and then enter the new password twice. Click

Apply. To change the login idle timeout, change the number of minutes and click Apply.

1 2 ... 164 165 166 167 168 169 170 171 172 173 174 ... 295 296

Pas de commentaire

Netgear 802.11g Manuel d'utilisateur Page 169