Netgear GS728TP Manuel d'utilisateur télécharger pdf (Page 232)

100

101

Routing

232

ProSafe M5300 Switch

OSPF

Note: OSPF is a licensed feature and is available only on switches that

have an active license installed.

From the OSPF link, you can access the following pages:

• Basic on page 232

• Advanced on page 233

Basic

From the Basic link, you can access the following pages:

• OSPF Configuration (Basic) on page 232

OSPF Configuration (Basic)

Use the OSPF Configuration page to enable OSPF on a router and to configure the related

OSPF settings.

To display the OSPF Configuration page, click Routing OSPF Basic  OSPF

Configuration.

To configure the administrative mode of OSPF on the switch:

1. Use Router ID to specify a 32-bit integer in dotted decimal format that uniquely identifies

the router within the autonomous system (AS). To change the Router ID you must first

disable OSPF. After you set the new Router ID, you must re-enable OSPF to have the

change take effect. The default value is 0.0.0.0, although this is not a valid Router ID.

2. Use Admin Mode to select enable or disable. If you select enable, OSPF will be activated

for the switch. The default value is disable. You must configure a Router ID before OSPF

can become operational; see step 1 or by issuing the CLI command:

(Config-router)#router-id.

3. Click APPLY to update the switch with the changes.

4. Click CANCEL to abandon the changes.

1 2 ... 227 228 229 230 231 232 233 234 235 236 237 ... 529 530

Commentaires sur ces manuels

Pas de commentaire

Netgear GS728TP Manuel d'utilisateur Page 232

Commentaires sur ces manuels

Produits connexes et manuels pour Logiciel Netgear GS728TP