Netgear WNAP210 Manuel d'utilisateur télécharger pdf (Page 9)

2. Installation and Configuration

This chapter describes how to set up your access point for wireless connectivity to your LAN.

This basic configuration will enable computers with 802.11b/g/n wireless adapters to connect

to the Internet, or access printers and files on your LAN. This chapter covers the following

topics:

• Wireless Equipment Placement and Range Guidelines

• Prepare to Install the Access Point

• Connect to the Access Point

• Log In to the Access Point

• Configure LAN Settings

• Set Basic IP Options

• Set Up and Test Basic Wireless Connectivity

• QoS Settings

• Deploy the Access Point

• Wireless Security Options

• Security Profiles

• Restrict Wireless Access by MAC Address

You need to prepare these three things before you can establish a connection through your

wireless access point:

• A location for the access point that conforms to the guidelines in the following section,

Wireless Equipment Placement and Range Guidelines on page 10.

• The wireless access point connected to your LAN through a device such as a hub,

switch, router, or cable or DSL gateway.

• One or more computers with correctly configured 802.11b/g/n wireless adapters.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 81 82

Pas de commentaire

Netgear WNAP210 Manuel d'utilisateur Page 9