Netgear WAC120 Guide d'installation télécharger pdf (Page 5)

¾ To conﬁgure the LAN and wireless access settings:

1. Log in to the access point.

2. Select Conﬁguration > IP > IP Settings.

3. Conﬁgure the IP settings for your LAN.

For more information about IP settings, see the reference

manual.

4. Click the Apply button.

Your settings are saved.

5. Select Conﬁguration > Security > Proﬁle Settings.

6. Conﬁgure a security proﬁle for your wireless network.

For more information about security proﬁle settings, see the

reference manual.

7. Aer conﬁguring a security proﬁle, click the Apply button.

8. Using a computer or another wireless device, verify that you

can establish a wireless connection to the access point.

Install Your Access Point

Make sure that your Internet service is active before you install

your access point.

¾ To install your access point:

1. Prepare your network.

1 2 3 4 5 6 7 8 9 10 ... 13 14

Pas de commentaire

Netgear WAC120 Guide d'installation Page 5