Netgear WN604 Guide de l'utilisateur télécharger pdf (Page 22)

Installation and Basic Configuration

Wireless N150 Access Point WN604

 To configure basic wireless QoS settings for 11b//jointfilesconvert/22761/bg/ng and 11a/na:

1. Select Configuration > Wireless > Basic > QoS Settings. The QoS Settings screen

displays:

2. Wi-FI Multimedia (WMM) is enabled by default. Select the Disable radio button to disable

WMM support.

3. WMM Power Save is enabled by default. Select the Disable radio button to disable WMM

power save.

4. Click Apply to save your settings

Set Up and Test Basic Wireless Connectivity

Follow these instructions to set up and test basic wireless connectivity. Once you have

established basic wireless connectivity, you can enable security settings appropriate to your

needs.

Note: If you are configuring the access point from a wireless computer and

you change the SSID, channel, or security profile settings, you will

lose your wireless connection when you click Apply. To connect to

the wireless network, you have to change the wireless settings of

your computer to match the new settings.

 To set up and test wireless connectivity:

1. Select Configuration > System. V

erify that the correct country/region in which the

wireless interface will operate has been selected.

2. Click Apply to save any changes.

3. Select Configuration > Wireless.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 67 68

Pas de commentaire

Netgear WN604 Guide de l'utilisateur Page 22