Netgear WN604 Guide de l'utilisateur télécharger pdf (Page 13)

Installation and Basic Configuration

Wireless N150 Access Point WN604

Your web browser finds the access point and displays the General Settings screen.

Install the Access Point

Before installing the access point, make sure that your Ethernet network is up and working.

You will be connecting the access point to the Ethernet network so that computers with

802.11b/g/n wireless adapters will be able to communicate with computers on the Ethernet

network. In order for this to work correctly, verify that you have met all of the system

requirements, shown in System Requirements on page 7.

Tip: Before mounting the access point in a high location, first set up and test

the access point to verify wireless network connectivity

NETGEAR recommends that you configure the access point in this sequence:

1. Specify your country or region.

2. Set the time.

3. Set the basic IP options.

4. Configure the wireless settings.

5. Deploy the access point.

Configure the System Settings for Your Location

When you log in, the Configuration tab is selected and the General screen is displayed. This

is where you specify your location. The access point uses this setting to determine which

channels should be used for wireless communication.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 67 68

Pas de commentaire

Netgear WN604 Guide de l'utilisateur Page 13