Netgear DG834 Instructions d'exploitation télécharger pdf (Page 39)

Reference Manual for the Model DG834 ADSL Firewall Router

Connecting the Router to the Internet 3-17

• Select “Get Automatically from ISP” if your ISP assigns your IP address.

• Select “Use Static IP Address” if your ISP gives you a statically assigned address.

6. The DNS server is used to look up site addresses based on their names.

• Select “Get Automatically from ISP” if your ISP uses DHCP to assign your DNS servers.

Your ISP will automatically assign this address.

• Select “Use These DNS Servers” if your ISP gave you one or two DNS addresses. Type

the primary and secondary addresses.

7. You should only disable NAT if you are sure you do not require it. NAT automatically assigns

private IP addresses (192.168.0.x) to LAN connected devices. When NAT is disabled, only

standard routing is performed by this router.

Classical routing lets you directly manage the IP addresses the DG834 uses. Classical routing

should selected only by experienced users.

Note: Disabling NAT will reboot the router and reset all the DG834 configuration settings to

the factory default. Disable NAT only if you plan to install the DG834 in a setting where you

will be manually administering the IP address space on the LAN side of the router.

Internet Connection Requires Login and Uses PPPoA

1. If your Internet connection does require login, select Yes and fill in the settings according to

the instructions below.

Note: You will no longer need to launch the ISP’s login program on your computer in order to

access the Internet. When you start an Internet application, your router automatically logs you

in.

2. Choose PPPoA for the encapsulation method your ISP uses.

3. Enter the login name (frequently the email address your ISP provided), and password.

4. If you want to change the login timeout, enter a new value in minutes. This determines how

long the router keeps the Internet connection active after there is no Internet activity from the

LAN. Entering an Idle Timeout value of zero means never log out.

5. When a connection uses PPPoA, the IP address is normally assigned automatically. However,

the DG834 allows this address to be set manually.

• Select “Get Automatically from ISP” if your ISP assigns your IP address.

• Select “Use Static IP Address” if your ISP gives you a statically assigned address.

6. The DNS server is used to look up site addresses based on their names.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 141 142

Pas de commentaire

Netgear DG834 Instructions d'exploitation Page 39