Netgear DG834 Instructions d'exploitation Page 29

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 142
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 28
Reference Manual for the Model DG834 ADSL Firewall Router
Connecting the Router to the Internet 3-7
c.
Connect the Ethernet cable (C) from your DG834’s LAN port to the Ethernet adapter in
your computer.
Figure 3-6: Connecting a computer to the DG834 ADSL router
Note: The DG834 ADSL router incorporates Auto Uplink
TM
technology. Each Ethernet LAN
port will automatically sense whether the cable plugged into the port should have a 'normal'
connection (for example, connecting to a computer) or an 'uplink' connection (for example,
connecting to a switch or hub). That port will then configure itself to the correct configuration.
This feature also eliminates the need to worry about crossover cables, as Auto Uplink will
accommodate either type of cable to make the right connection.
d. Connect the power adapter to the router and plug it in to a power outlet. Verify the
following:
The power light is lit after turning on the router.
The ADSL link light is solid green, indicating a link has been established to the
ADSL network.
e. Now, turn on your computer. If software usually logs you in to your Internet connection,
do not run that software or cancel it if it starts automatically. Verify the following:
The local lights are lit for any connected computers.
Note: For instructions on connecting computers to the DG834 via wireless links, please
see the Chapter 4, “Wireless Configuration”.
3KRQH
'6/
/LQH
!$3,&IREWALL2OUTER$'
C
Vue de la page 28
1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 141 142

Commentaires sur ces manuels

Pas de commentaire