Netgear UTM5 Manuel d'utilisateur Page 161

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 484
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 160
ProSecure Unified Threat Management (UTM) Appliance Reference Manual
Firewall Protection 5-47
v1.0, January 2010
Note these restrictions on port triggering:
Only one PC can use a port triggering application at any time.
After a PC has finished using a port triggering application, there is a short time-out period
before the application can be used by another PC. This time-out period is required so the UTM
can determine that the application has terminated.
To add a port triggering rule:
1. Select Network Security > Port Triggering from the menu. The Port Triggering screen
displays. (Figure 5-28 shows a rule in the Port Triggering Rule table as an example.)
2. Below Add Port Triggering Rule, enter the settings as explained in Table 5-10 on page 5-48.
Note: For additional ways of allowing inbound traffic, see
“Inbound Rules (Port Forwarding)” on page 5-6.
Figure 5-28
Vue de la page 160
1 2 ... 156 157 158 159 160 161 162 163 164 165 166 ... 483 484

Commentaires sur ces manuels

Pas de commentaire