Netgear UTM5 Manuel d'utilisateur Page 157

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 484
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 156
ProSecure Unified Threat Management (UTM) Appliance Reference Manual
Firewall Protection 5-43
v1.0, January 2010
2. In the MAC Filtering Enable section, select the Yes radio button.
3. In the same section, select one of the following options from the pull-down menu (next to
Policy for MAC Addresses listed below):
Block. Traffic coming from all addresses in the MAC Addresses table is blocked.
Permit. Traffic coming from all addresses in the MAC Addresses table is permitted.
4. Below Add Source MAC Address, build your list of source MAC addresses to be permitted or
blocked by entering the first MAC address in the MAC Address field. A MAC address must be
entered in the form xx:xx:xx:xx:xx:xx, where x is a numeric (0 to 9) or a letter between and a
and f (inclusive), for example: aa:11:bb:22:cc:03.
5. Click the Add table button. The MAC address is added to the MAC Addresses table.
6. Click Apply to save your settings.
To remove one or more entries from the table:
1. Select the checkbox to the left of the MAC address that you want to delete or click the Select
All table button to select all entries.
2. Click the Delete table button.
Figure 5-26
Vue de la page 156
1 2 ... 152 153 154 155 156 157 158 159 160 161 162 ... 483 484

Commentaires sur ces manuels

Pas de commentaire