Netgear PS100 Manuel d'utilisateur télécharger pdf (Page 71)

NetGear Print Server Manual

Assigning an IP Address to the Print Server Using ARP

To assign an IP address using the Address Resolution Protocol (ARP):

1. Determine the physical address and the device name of the print server.

The factory default name and the physical address are shown on a sticker on the bottom of the unit. The

default name on your device is PSxxxxxx.

2. Log in to the UNIX host as root.

3. Add the print server to the /etc/hosts file by adding to the file:

IP_Address NAME # Comment

Use these definitions for entering the information:

IP_Address is the IP address of your print server.

NAME is the name of your print server.

A sample entry is:

192.10.2.54 PS_Rm203 #Default name PS123456

In the example, a print server with an IP address of 192.10.2.54 is called PS_Rm203 and has a default name

of PS123456.

4. Compare the physical address with the IP address of the print server, using the ARP command as

follows:

arp -s NAME 00:c0:02:xx:yy:zz

Use these definitions for entering the information:

NAME is the name of your print server.

00:c0:02:xx:yy:zz is the physical address of the print server.

A sample entry is:

arp -s PS_Rm203 00:c0:02:12:34:56

5. To assure that an IP address has been assigned, check the IP address to MAC address association

using the ping command:

ping NAME

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 141 142

Pas de commentaire

Netgear PS100 Manuel d'utilisateur Page 71