Netgear 771S Guide de l'utilisateur télécharger pdf (Page 112)

● LTE only – The connection can be established only on an LTE network. Your device

will not connect to CDMA or GSM networks.

● CDMA only – The connection can be established only on a CDMA (3G) network. Your

device will not connect to LTE or GSM networks.

On the Touchscreen

1. Tap > Settings > Network.

2. Tap Network Mode.

3. Select the network mode that your device can connect to:

In the Zing Manager (http://sprinthotspot)

1. Log in to the home page. (See Logging In as an Administrator.)

2. Click Settings > Network > Preferences.

3. Beside Network Mode, select the desired network mode that your device can

connect to.

4. Click Submit.

Configuring Access Point Names

Your device comes preconfigured with the Access Point Name (APN) for Sprint.

To add an APN for another network:

1. Log in to the home page. (See Logging In as an Administrator.)

2. Click Settings > Network > APN.

3. In the blank line, enter the APN details:

• Active – If the new APN is going to be used now, select this button.

• Name – Enter a short description (for example, the carrier name).

• APN – Enter the APN you obtained from the carrier.

• Username – Enter the username you obtained from the carrier (if required).

• Password – Enter the password you obtained from the carrier (if required).

• Select the Authentication mode to be used (None, PAP, CHAP, PAP or

CHAP).

Configuring Networks 104

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 204 205

Pas de commentaire

Netgear 771S Guide de l'utilisateur Page 112