Netgear 771S Guide de l'utilisateur télécharger pdf (Page 106)

Note: Port forwarding must currently be enabled. (See Enabling Port Forwarding for an

Application.)

1. Log in to the home page. (See Logging In as an Administrator.)

2. Click Settings > Router > Port Forwarding.

3. Click the beside the row that you want to remove.

4. Click Submit.

DMZ – General

You can select one computer to receive all unsolicited incoming connections.

The IP address of the DMZ (“demilitarized zone”) is the default recipient of incoming packets

(from the Internet) that are not handled by port forwarding rules or NAT’d connections:

● If port forwarding is enabled, incoming traffic is routed according to the port forwarding

rules or NAT’d connections.

● If incoming traffic was not routed as a result of the above:

 If DMZ is enabled, then incoming traffic is routed to the computer that uses the IP

address specified by the DMZ settings.

 If DMZ is not enabled, the incoming traffic is blocked.

Note: Putting a computer in the DMZ opens all the ports of that computer, and exposes that

computer to various security risks. Use this option only as a last resort — if possible, use

other options instead (for example, port forwarding).

Enabling DMZ

Before you can use or configure DMZ, you must enable it.

1. Log in to the home page. (See Logging In as an Administrator.)

2. Click Settings > Router > Basic.

3. Next to DMZ Enabled, select On.

4. Click Submit.

Configuring DMZ

Specify which computer is to receive all unsolicited incoming connections.

Note: DMZ must currently be enabled. (See Enabling DMZ.)

1. Log in to the home page. (See Logging In as an Administrator.)

Device Settings 98

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 204 205

Pas de commentaire

Netgear 771S Guide de l'utilisateur Page 106