Netgear DG834G Manuel d'utilisateur télécharger pdf (Page 52)

Reference Manual for the 54 Mbps Wireless ADSL Firewall Router DG834G

4-8 Wireless Configuration

202-10006-01

If the wireless station is currently connected to the network, you can select it from the

Available Wireless Stations list. Click Add to add the station to the Trusted Wireless Stations

list.

5. If the wireless station is not currently connected, you can enter its address manually. Enter the

MAC address of the authorized computer. The MAC address is usually printed on the wireless

card, or it may appear in the router’s DHCP table. The MAC address will be 12 hexadecimal

digits.

Click Add to add your entry. You can add several stations to the list, but the entries will be

discarded if you do not click Apply.

Note: You can copy and paste the MAC addresses from the router’s Attached Devices menu

into the MAC Address box of this menu. To do this, configure each wireless computer to

obtain a wireless link to the router. The computer should then appear in the Attached Devices

menu.

6. Make sure the Turn Access Control On check box is selected, then click Apply.

Now, only devices on this list will be allowed to wirelessly connect to the DG834G. This prevents

unauthorized access to your network.

Note: If you are configuring the router from a wireless computer whose MAC address is

not in the Trusted Wireless Stations list, and you select Trusted Wireless Stations only,

you will lose your wireless connection when you click Apply. You must then access the

router from a wired computer to make any further changes.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 165 166

Pas de commentaire

Netgear DG834G Manuel d'utilisateur Page 52