Netgear DG834G Manuel d'utilisateur télécharger pdf (Page 48)

Reference Manual for the 54 Mbps Wireless ADSL Firewall Router DG834G

4-4 Wireless Configuration

202-10006-01

— Mode. The default is "g & b", which allows both "g" and "b" wireless stations to access

this device. “g only” allows only 802.11g wireless stations to be used. “b only” allows

802.11b wireless stations; 802.11g wireless stations can still be used if they can operate in

802.11b mode.

• Wireless Access Point.

— Enable Wireless Access Point. This field lets you turn off or turn on the wireless access

point built in to the router. The wireless icon on the front of the router will also display the

current status of the Wireless Access Point to let you know if it is disabled or enabled. The

wireless access point must be enabled to allow wireless stations to access the Internet.

— Allow Broadcast of Name (SSID). If enabled, the SSID is broadcast to all Wireless

Stations. Stations which have no SSID (or a "null" value) can then adopt the correct SSID

for connections to this Access Point.

• Wireless Station Access List.

– By default, any wireless computer that is configured with the correct wireless network

name or SSID will be allowed access to your wireless network. For increased security, you

can restrict access to the wireless network to only specific computers based on their MAC

addresses. Click Setup Access List to display the Wireless Station Access List menu.

• Security Encryption (WEP)

— Authentication Type. Normally this can be left at the default value of "Automatic". If that

fails, select the appropriate value — "Open System" or "Shared Key". Check your

wireless card's documentation to see what method to use.

— Encryption Strength. Select the WEP Encryption level: Disable (no data encryption),

64-bit (sometimes called 40-bit) encryption, or 128-bit encryption.

• Security Encryption (WEP) Key

— If WEP is enabled, you can manually or automatically program the four data encryption

keys. These values must be identical on all PCs and Access Points in your network.

— Automatic Key Generation (Passphrase). Enter a word or group of printable characters in

the Passphrase box and click the Generate button to automatically configure the WEP

Key(s). If encryption strength is set to 64 bit, then each of the four key boxes will

automatically be populated with key values. If encryption strength is set to 128 bit, then

only the selected WEP key box will automatically be populated with key values.

— Manual Entry Mode. Select which of the four keys will be used and enter the matching

WEP key information for your network in the selected key box. For 64 bit WEP, enter ten

hexadecimal digits (any combination of 0-9, A-F). For 128 bit WEP, enter twenty-six

hexadecimal digits.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 165 166

Pas de commentaire

Netgear DG834G Manuel d'utilisateur Page 48