Netgear 802.11g Manuel d'utilisateur télécharger pdf (Page 16)

4. Click OK.

You’ll see the Status page.

5. Click Change Password.

6. Type the old password in the Old

Password box.

7. Type a new password in the New

Password box.

8. Re-type the new password in the

Confirm Password box.

9. Click Apply.

10. If you are through making changes,

click Logout.

Enabling WEP Security

To prevent others from accessing your wireless network, you may enable WEP (Wired

Equivalent Privacy) security on your wireless network. If you do so, you’ll need to enable WEP

security in all the devices. If you filled in the parameters on page 7, you may want to refer to

that page before making any configuration change.

Note: By default, WEP security is disabled.

1. Start your browser software.

2. Type http:// followed by the IP address for the bridge as the web address and press Enter

(or Return).

Note: The default value is

192.168.0.201. If you’ve set the bridge

to use DHCP, check the router table to

find out what the current address is for

the bridge.

3. Type

admin as the User ID and

type the current password.

(password is the default.)

4. Click

OK.

You’ll see the Status page.

5. To change the WEP settings, click

Wireless Settings.

6. Select Web Data Encryption to enable WEP security.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 25 26

Pas de commentaire

Netgear 802.11g Manuel d'utilisateur Page 16