Netgear WNHDE111 Manuel d'utilisateur télécharger pdf (Page 22)

WNHDE111 5GHz Wireless-N HD Access Point/Bridge User Manual

2-2 Easy Secure Wireless Setup

v1.1, May 2008

Access Point Mode WPS Setup

These instructions will guide you through connecting the access point to a router. Then, you will

connect wirelessly using WPS technology.

1. Connect the Ethernet cable from a LAN port on your existing router or gateway to either

Ethernet port on the Wireless-N Access Point. You can leave the mode switch set to the default

of Auto, or set it to AP mode (but not to Bridge mode).

2. Connect the power adapter to the unit. Verify that the power light

is on.

Note: Make sure that the LED on/off switch is on. When it is off, all

the status lights on the unit will be off, including the power

light, the Ethernet port lights, and the WPS button will not light

when pushed.

You are finished with setting up the access point.

Figure 2-1

WNHDE111

Access Point

Router/gateway

Internet

Laptop with adapter like the NETGEAR

WNDA3100 USB Adapter

Power light

WPS button/light

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 81 82

Pas de commentaire

Netgear WNHDE111 Manuel d'utilisateur Page 22