Netgear WNHDE111 Manuel d'utilisateur télécharger pdf (Page 20)

WNHDE111 5GHz Wireless-N HD Access Point/Bridge User Manual

1-6 Getting Acquainted

v1.1, May 2008

Positioning Your Unit

The operating distance or range of your wireless connection can vary significantly depending on

the physical placement of your unit. For example, the thickness and number of walls the wireless

signal must pass through might limit the range.

For best results, place your bridge:

• Near the center of the area where your computers and other devices will operate, preferably

within line of sight to your wireless devices.

• Accessible to an AC power outlet and near Ethernet cables for wired computers.

• In an elevated location such as a high shelf, keeping the number of walls and ceilings between

the wireless range extender and your other devices to a minimum.

• Away from any large metal surfaces, such as a solid metal door or aluminum studs. Large

expanses of other materials such as glass, insulated walls, fish tanks, mirrors, brick, and

concrete can also affect your wireless signal.

• If placing 2 Wireless-N AccessPoint/Bridges with a direct line of sight between them, do not

place them closer than 15 feet, as the antennas are tuned for this optimum distance. Orient the

2 units with the front panels (the side with the Power light) facing each other.

Serial Number which is also

default WPA/WPA2 security

key.

The serial number is also the factory default WPA/WPA2 security key.

This enables easy automated WPS Push 'N' Connect setup.

MAC Address. The Media Access Control (MAC) address of this unit, which will be

visible in status monitoring screens on the unit or on a router.

Note: Failure to follow these guidelines can result in significant performance degradation

or an inability to wirelessly connect to the bridge.

Table 1-2. Product label information

Item Description

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 81 82

Pas de commentaire

Netgear WNHDE111 Manuel d'utilisateur Page 20