Netgear WNDAP350 Manuel d'utilisateur télécharger pdf (Page 74)

ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual

3-8 Management

v1.1, November 2009

Under the Maintenance tab on the main menu, select Upgrade, then select Restore Settings from

the sidebar to back up your current settings. The following screen displays:

1. Enter the full path to the file on your computer or click the Browse button to locate the file.

2. When you have located the file, click Restore to upload the file. After completing the upload,

the WNDAP350 will reboot automatically.

Restoring the WNDAP350 to the Factory Default Settings

It is sometimes desirable to restore the wireless access point to the factory default settings. This

can be done by using the Restore Defaults option, which restores all factory settings.

To access this function:

1. Under the Maintenance tab on the main menu, select Reset, and then select Restore Defaults

from the sidebar. The Restore Defaults screen displays, as shown in Figure 3-7 below.

Figure 3-6 Restore Configuration settings from file

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 135 136

Pas de commentaire

Netgear WNDAP350 Manuel d'utilisateur Page 74