Netgear WG102 Manuel d'utilisateur Page 53

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 118
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 52
Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point WG102
Basic Installation and Configuration 3-31
202-10064-02, June 2005
Shared Secret: This is shared between the Wireless Access Point and the Radius Server
while authenticating the supplicant.
Re-authentication Time: The time interval in seconds after which the supplicant will be
authenticated again with the Radius Server. The default is 3600 seconds.
Global-key Re-Key Time: Check on this option to enable Re-keying of Global Key. The
Global Key Re-Key can be done based on time interval in seconds or number of packets
exchanged using the global key. The default is 3600 seconds.
Update if any station disassociates: Check on this option to refresh global key when any
stations disassociated with wireless Access Point.
Accounting Radius Server Configuration: This configuration is required for accounting
using Radius Server. IP Address, Port No. and Shared Secret is required for
communication with Radius Server. A Secondary Radius Server can be configured which
is used on failure on Primary Radius Server.
IP Address: The IP address of the Radius Server. The default is 0.0.0.0.
Port Number: Port number of the Radius Server. The default is 1813.
Shared Secret: This is shared between the Wireless Access Point and the Radius Server
while authenticating the supplicant.
4. Click Apply to save your settings.
5. Click WEP/WPA Settings in the Security menu.
Figure 3-19: WEP/WPA Settings menu
Vue de la page 52
1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 117 118

Commentaires sur ces manuels

Pas de commentaire