Netgear WAG302v2 Manuel d'utilisateur Page 96

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 104
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 95
NETGEAR ProSafe Dual Band Wireless Access Point WAG302v2 Reference Manual
C-12 Command Line Reference
v1.0, May 2006
RADIUS Server Settings
The commands in Table C-10 correspond to the RADIUS Server Settings page on the Web UI.
Set Network Authentication to
WPA and WPA2 with RADIUS
set interface wlan0 security wpa-enterprise
set bss wlan0bssvap0 wpa-allowed on
set bss wlan0bssvap0 wpa2-allowed on
Enable Wireless Client Security
Separation
set radio wlan0 station-isolation on
Disable Wireless Client Security
Separation
set radio wlan0 station-isolation off
Set the VLAN ID for the Security
Profile
set vap vap0 with radio wlan0 vlan-id <1-4096>
Table C-10 RADIUS Server Settings
Task Command
Set the IP Address of the
Primary Authentication Server
set radius-client primary-authentication-
server <ip_address>
Set the Port Number of the
Primary Authentication Server
set radius-client primary-authentication-
port <port_number>
Set the Shared Secret for the
Primary Authentication Server
set radius-client primary-authentication-
key <value>
Set the IP Address of the
Secondary Authentication
Server
set radius-client secondary-authentication-
server <ip_address>
Set the Port Number of the
Secondary Authentication
Server
set radius-client secondary-authentication-
port <port_number>
Set the Shared Secret for the
Secondary Authentication
Server
set radius-client secondary-authentication-
key <value>
Set the IP Address of the Pri-
mary Accounting Server
set radius-client primary-accounting-
server <ip_address>
Table C-9 Security Profile Settings (continued)
Task Command
Vue de la page 95
1 2 ... 91 92 93 94 95 96 97 98 99 100 101 102 103 104

Commentaires sur ces manuels

Pas de commentaire