Netgear WAG102 Manuel d'utilisateur télécharger pdf (Page 57)

ProSafe Dual Band Wireless Access Point WAG102 Reference Manual (802.11a/g)

Basic Installation and Configuration 2-31

v2.0, September 2006

Configuring WPA with RADIUS

Not all wireless adapters support WPA. Furthermore, client software is required on the client.

Windows XP and Windows 2000 with Service Pack 3 or above do include the client software that

supports WPA. Nevertheless, the wireless adapter hardware and driver must also support WPA.

Consult the product document for your wireless adapter and WPA client software for instructions

on configuring WPA settings.

To configure WPA, follow these steps:

1. Under Security on the menu, select RADIUS Server Settings. The RADIUS Server Settings

screen will display.

2. Enter the RADIUS Server Settings as shown in “Configuring the RADIUS Server Settings” on

page 2-25.

3. Click Apply to save your RADIUS Server settings.

4. Under Security on the main menu, select either Security Profile Settings 11a or Security

Profile Settings 11b/g. When the security profile screen displays, check the radio button of the

security profile you want to modify and click Edit.

Note: If you use a wireless computer to configure WEP settings, you will be

disconnected when you click Apply. Reconfigure your wireless adapter to match

the new settings or access the wireless access point from a wired computer to

make any further changes.

Figure 2-16

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 101 102

Pas de commentaire

Netgear WAG102 Manuel d'utilisateur Page 57