Netgear RangeMax WN802T Manuel d'utilisateur télécharger pdf (Page 71)

NETGEAR Wireless-N Access Point WN802T v2 Reference Manual

Advanced Wireless Bridging 5-3

v1.0, September 2008

7. Enter the MAC (physical) address of the other bridge mode wireless access point in the

Remote MAC Address field.

8. Under Authentication Settings, select one of the network authentication types from the

Network Authentication drop-down menu (one of the supported types—WEP, WPA-PSK, or

WPA2-PSK should be used to protect the communication).

9. Select encryption strength from the Data Encryption options available.

10. Click Apply.

11. You are taken back to the Wireless Bridge Settings screen (Figure 5-1) with the new profile

information. Enable the profile now if you wish to.

You can add more wireless access points in the same way for a total of six (these wireless

access points must be configured for Multi-Point Bridging).

12. Click Apply to save your changes.

Figure 5-2 Edit security profile

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 95 96

Pas de commentaire

Netgear RangeMax WN802T Manuel d'utilisateur Page 71