Netgear AirCard 785 Retail unlocked Guide de l'utilisateur télécharger pdf (Page 51)

Advanced Settings

AirCard 785 Mobile Hotspot

4. Click the Sign In button.

5. Select Settings > Router > Port Filtering.

6. From the Port Filtering list, select one of the following:

• Black List. Specific applications are not allowed to access the Internet (block list).

• White List. Specific applications are allowed to access the Internet (allow list).

Only one list at a time can be active, either a black list or a white list.

7. Identify the ports to filter

8. Enter a meaningful label that describes the service.

9. Enter the port and communication protocol being used.

The Submit button displays after you make a selection.

10. Click the Submit button.

Your changes are saved.

Enable IP Pass-Through Mode

To turn off the hotspot router functionality and assign the network IP address directly to the

attached device, enable IP pass-through.

If you make this change, the attached device restarts using a different driver configuration.

Note: This feature is available to Windows computer users. If you are a Mac

user, do not enable this option because you will be unable to access

your device.

 To enable IP pass-through mode:

1. Launch a web browser from a computer or wireless device that is connected to the

network.

2. Enter http://netgear

.aircard or http://192.168.1.1.

A login screen displays.

3. Enter the password in the Sign In field.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 66 67

Pas de commentaire

Netgear AirCard 785 Retail unlocked Guide de l'utilisateur Page 51