Netgear FVG318 Manuel d'utilisateur Page 49

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 176
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 48
ProSafe 802.11g Wireless VPN Firewall FVG318 Reference Manual
Configuring Wireless Connectivity 3-11
v1.0, September 2007
3. In the Wireless Security Type section, select the WEP radio box. The WEP fields section will
be highlighted.
4. Choose the Authentication Type (Automatic, Open System or Shared Key) and Encryption
Strength options. You can manually or automatically program the four data encryption keys.
These values must be identical on all PCs and Access Points in your network.
Authentication Type: Normally this can be left at the default value of “Automatic.” If set
to “Open System” or “Shared Key”, wireless stations must use the same method.
Encryption: Select the desired WEP Encryption:
64-bit (sometimes called 40-bit) encryption
128-bit encryption
WEP Keys: If using WEP, you can manually or automatically program the four data
encryption keys. These values must be identical on all PCs and Access Points in your
network.
Automatic Key Generation (Passphrase): Enter a word or group of printable
characters (this phrase is case sensitive) in the Passphrase box and click the “Generate
Keys” button to automatically configure the WEP Key(s).
If encryption is set to 64 bit, then each of the four key boxes will automatically be
populated with key values.
If encryption is set to 128 bit, then only the selected WEP key box will automatically
be populated with a key value.
Figure 3-5
Vue de la page 48
1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 175 176

Commentaires sur ces manuels

Pas de commentaire