Netgear PS121v2 Manuel d'utilisateur Page 17

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 50
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 16
2-1
v1.1, September 2006
Chapter 2
Setup
This chapter describes how to install your PS121v2 USB Multifunction Print Server and set up
basic connectivity on your Local Area Network (LAN).
Verify Printer and Network Readiness
Assure that the following are available:
You have a working Ethernet network running TCP/IP with at least one Windows 98SE, Me,
2000, or XP PC.
You have a printer with a USB port.
You may also need to have your printer driver software handy. For most popular printers,
Windows already has the printer driver software available.
Observe these Precautions
For your own safety, and to protect your Print Server, please observe the following precautions.
Use only the correct 12V 1A power adapter. Do not pinch, crimp or otherwise damage the
power cord. If exposed to foot traffic, ensure that the cable is properly shielded and does not
pose a tripping hazard.
Note: The PS121v2 USB Multifunction Print Server does not support printers using
parallel connectors. If your printer uses a parallel connector, you should use
one of the other NETGEAR Print Servers such as the Model PS101 Mini Print
Server.
Tip: Directly connect the printer you will use to a computer and verify that it is working
properly before connecting it to the USB Multifunction Print Server
Vue de la page 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 49 50

Commentaires sur ces manuels

Pas de commentaire