Netgear WAG511 Guide de l'utilisateur télécharger pdf (Page 33)

NETGEAR Dual Band Wireless PC Card 32-bit CardBus WAG511 User Manual

2-11

v4.0, March 2007

5. Select Create with Passphrase and enter the passphrase. The configuration utility will

automatically generate the WEP keys.

If the passphrase method is not available in the other devices, you must manually enter the

keys to match exactly what is in the access point and other 802.11b wireless devices.

6. To save your settings in a Profile, click Save Profile.

7. Click Apply, and then click Close to exit the utility.

Setting up Advanced Security

Advanced Security includes WPA/WPA2, WPA/WPA2-PSK, 802.1x, and Cisco LEAP.

To configure Advanced security:

1. Make sure the NETGEAR software is installed and the WAG511 Wireless PC Card is fully

inserted in the CardBus slot in your computer.

2. Use the icon to open the Smart Wireless Utility. The Settings tab page opens.

3. Enter the profile and Network Name (SSID).

Note: The characters are case sensitive. Be sure to use the same passphrase for all the

wireless devices in the network.

Note: You will not get a wireless network connection unless the SSID that you enter

exactly matches the SSID used by the access point

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 43 44

Pas de commentaire

Netgear WAG511 Guide de l'utilisateur Page 33