Netgear WNA1000 Guide de l'utilisateur télécharger pdf (Page 36)

NETGEAR Wireless-N 150 USB Adapter WNA1000 User Manual

2-12

v1.0, August 2009

c. A continuous ping will be sent to the device with the 192.168.0.1 static IP address. The

ping response should change to Reply.

At this point the connection is established.

Starting a Computer-to-Computer (Ad Hoc) Network Connection

1. On the Settings tab of the Smart Wizard, select or type the network name (SSID).

2. Select the Computer-to-Computer (Ad Hoc) network type.

3. Click Initiate Ad Hoc. The Ad Hoc Setting screen displays:

4. In the Start Ad Hoc drop-down list, select the wireless standard (802.11g or 802.11b) for your

Ad Hoc computer-to-computer network.

Figure 2-10

Note: If you cannot connect, see “Troubleshooting Tips” on page 4-1. For problems

accessing network resources, the Windows client and file and print sharing

software might not be installed or configured correctly on your computers. See the

link to “Internet Networking and TCP/IP Addressing:” in Appendix B.

Note: for Windows Vista computers, you must have administrator rights. Otherwise,

this option is not available for selection.

Figure 2-11

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 57 58

Pas de commentaire

Netgear WNA1000 Guide de l'utilisateur Page 36