Netgear WG511T Guide de l'utilisateur télécharger pdf (Page 36)

NETGEAR 108 Mbps Wireless PC Card WG511T User Manual

2-16 Network Connections and Wireless Security

v3.0, January 2007

Setting up WPA-PSK Security

Follow the steps below to configure WPA-PSK Security.

1. Run the WG511T Smart Wizard.

a. Make sure the WG511T software is installed and the WG511T is fully inserted in an

available CardBus slot in your laptop computer.

b. Use the icon to open the Smart Wizard. The Settings tab page opens.

2. Configure the Security settings.

a. In the Profile box, select the profile or type in a profile name.

b. In the Network Name (SSID) field select the network, or enter the SSID.

c. In the Security section, select WPA-PSK [TKIP].

For more information on WPA security, see the Web link to “Wireless Communications”

on page B-1.

3. Save your settings in a Profile.

Figure 2-12

Note: You will not get a wireless network connection unless the network SSID

matches exactly what is configured in the access point.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 47 48

Pas de commentaire

Netgear WG511T Guide de l'utilisateur Page 36