Netgear WC9500 Manuel d'utilisateur télécharger pdf (Page 52)

RF Planning and Deployment

ProSAFE Wireless Controller WC9500

By default, the IP address is 192.168.0.250.

The wireless controller’s login screen displays.

2. Enter your user name and password.

If you did not yet personalize your user name and password, enter admin for the user

name and password for the password, both in lowercase letters.

3. Click the Login button.

The wireless controller’s web management interface opens and displays the Summary

screen.

4. Select Plans > Planning.

The screen displays the Planning icons.

5. In the building tree on the left, click the name of the building to which you are adding a floor

6. Click the Add Floor

icon.

7. Define the floor:

a. Enter a name for the floor.

b. Upload a custom floor map by clicking the Browse button, following the directions of

your browser to navigate to a floor map, and selecting the floor map.

ou can upload a plan in .png, .jpg, or .gif format.

c. T

o either specify the floor width or the floor length, do the following:

• To specify the floor width, click the Width(X) button, select Meter or Feet from the

menu, and enter the floor width.

• To specify the floor length, click the Length(Y) button, select Meter

or Feet from

the menu, and enter the floor length.

Note: If you do not want to enter the length or width or the information is not

available, you can scale the floor later (see Scale a Floor on page 53).

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 356 357

Pas de commentaire

Netgear WC9500 Manuel d'utilisateur Page 52