Netgear ADSL2+ Modem Router DM111PSPv2 Manuel d'utilisateur télécharger pdf (Page 21)

ADSL2+ Modem Router DM111PSPv2 User Manual

Configuring Your Internet Connection 1-7

v1.0, December 2008

2. To bypass the Setup Wizard, select No, and then click Next. The Quick Setup screen displays:

3. Enter the settings in each Quick Setup screen. These settings are described in Table 1-2.

4. Click Finish to save the settings and reboot the modem router.

The following table describes the settings for the Quick Setup screens.

Figure 1-5

Table 1-2. Quick Setup Screen Settings

Screen Name Settings

Quick Setup Enter the following settings:

• VPI. The Virtual Path Identifier (VPI) identifies the virtual path

between endpoints in an ATM network. The valid range is from 0 to

255.

• VCI. The Virtual Channel Identifier (VCI) identifies the virtual channel

endpoints in an ATM network. The valid range is from 32 to 65535

(1 to 31 is reserved for well-known protocols).

Configure Internet Connection-

Connection Type

Enter the following settings. For information about these settings, see

Table 5-3 on page 5-4.

• Protocol

• Encapsulation Type

Configure Internet Connection-

WAN IP Settings

Enter the following settings. For information about these settings, see

Table 5-1 on page 5-2.

• Obtain IP Address Automatically

• WAN IP Address

• Enable NAT

•MTU

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 87 88

Pas de commentaire

Netgear ADSL2+ Modem Router DM111PSPv2 Manuel d'utilisateur Page 21