Netgear WG111v2 Manuel d'utilisateur télécharger pdf (Page 34)

NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111v2 User Manual

v3.0, January 2007

b. In the Network Name (SSID) field select the network, or enter the SSID.

c. In the Security section, select WPA2-PSK [AES].

For more information about WPA2-PSK security, see the Web link to “Wireless

Communications” on page 35.

3. Save your settings in a Profile.

a. Click the Save Profile button. All the configuration settings are saved in this profile.

b. Click Apply.

c. Click Close to exit the Smart Wizard.

Setting up WPA-PSK Security

Follow the steps below to configure WPA-PSK Security.

1. Run the Wireless Adapter Smart Wizard.

a. Make sure the software is installed and the Wireless Adapter is fully inserted in a USB

port in your computer.

b. Use the icon to open the Smart Wizard. The Settings tab page opens.

2. Configure the Security settings.

a. In the Profile box, select the profile or type in a profile name.

Note: You will not get a wireless network connection unless the network SSID

matches exactly what is configured in the access point.

Figure 21

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 45 46

Pas de commentaire

Netgear WG111v2 Manuel d'utilisateur Page 34